Products for liquid analysis - Sum parameters

BIOX-1010

Continuous short-time BOD analyzer


	Load control, monitoring of limit value, discharge or production loss, airport wastewater
	Various measuring ranges: 5 … 1,200 mg/l BOD up to 20 …100,000 mg/l BOD
	Response time 3 minutes, reagent-free measurement

PHOENIX-1010

Continuous short-time COD analyzer


	Control of inlet, outlet, industrial discharge, raw wastewater
	Uses ozone for oxidation
	Various measuring ranges: 10 - 100,000 mg/l COD
	Response time 3 to 15 minutes

PHOENIX-thermcat

High-temperature COD analyzer


	Raw wastewater, inlet, outlet, cooling water, industrial discharge
	High temperature catalytic oxidation
	Various measuring ranges: 4 - 10,000 mg/l COD
	Automatic self-calibration and self-control

STIP-scan

In-situ analyzer for 8 parameters


	UV/VIS spectroscopic system for nitrate, COD, TOC, SAC, SS, SV, SI and turbidity
	Various measuring ranges depending on parameter
	No chemicals or reagents required
	Self-cleaning and low maintenance

Stamosens CSS70 / CSM750

In-situ analysis system for SAC


	Wastewater
	Sensor and transmitter for dissolved organic substances
	Various measuring ranges: 0.3 … 50 1/m up to 15 … 700 1/m
	Economy-priced and ecological measuring process: no chemicals required

STIP-toc

High-temperature TOC analyzer


	Wastewater, chemical industry, river monitoring, cooling water control
	Self-cleaning rotating slit filter and salt trap
	Various measuring ranges: 2 - 5,000 mg/l TOC

EZ-TOC II

Wet-chemical TOC analyzer


	Control of outlet, methanol dosing, drinking and cooling water, salty wastewaters
	UV-supported chemical low temperature oxidation
	Various measuring ranges: 0 - 10,000 mg/l TOC
	Automatic self-calibration and -control

Print this page |

General functions