Product Silometer FMC420

For connecting to capacitance probes or Deltapilot S hydrostatic probes

 

Your benefits

Mechanical:

• Silometer FMC instruments in Minipac housing are ideal for control panel mounting.
  As compact units they can be mounted side by side on a standard symmetrical 35mm DIN rail. Removable terminal blocks make them easy to wire up.
  The instruments can be replaced without resoldering the wiring.
• A protective housing IP 55 with transparent cover is available for mounting in the open.
  The calibration elements are located under the flip-up front panel and are easily accessible whilst being protected from unauthorized use. The inside of the front panel shows diagrams to facilitate calibration.

Electrical:

• Build-up on a capacitance probe:
  This problem is usually solved by choosing the correct probe and the electronic insert EC 72 Z. A hydrostatic probe also operates where build-up occurs providing the material does not crystallise to form a hard crust.
• Easy calibration:
  Zero calibration is carried out when the container is empty and the measuring span (amplification) is adjusted when the container is full. These instruments have the advantage that amplification is independent of the zero point. The flashing row of LEDs on the front panel of the Silometer FMC 423 allows 0% and 100% to be set accurately without the use of auxiliary instruments.

The Silometer is used for continuous level measurement in tanks containing liquids.
The Silometer FMC 423 is also used as a level limit indicator or as a two point controller with adjustable switching differential.

The wide range of capacitance and hydrostatic probes (pressure sensors) allows measurement:

• in aggressive media
• at high pressures or vacuum
• at high or low temperatures
• in high or low viscous liquids
• in media where build-up is expected, etc.

Production time:
Endress+Hauser works to a defined standard production time (from order entry to goods issue) depending on the variant of the Silometer FMC420.
Production times can be confirmed via your contact person or via the online shop.

Distribution:
Endress+Hauser will ship your order direct to your delivery address. In certain cases express or emergency shipments can be made on request.

Track & Trace:
Check your order status online using your reference number or the Endress+Hauser order confirmation number.

Spare Parts Logistics:
Spare parts are handled as standard products with a short standard delivery time. On request we deliver on shortest possible delivery time (extra charge).