iTEMP TMT80
Temperature head transmitter

Product picture temperature head transmitter iTEMP TMT80 ©Endress+Hauser
Product picture temperature head transmitter iTEMP TMT80 with terminal assignment ©Endress+Hauser

Transformation of the sensor signals into stable and standardized output signal for all industries

This transmitter is configurable and supports both selected resistance sensor types and thermocouples. In order to obtain the highest measurement precision, linearization characteristics for every type of sensor are stored in the transmitter.
The standardized output signal used for process measurement is a 4 to 20 mA signal. This offers fast, easy and cost-saving temperature measuring and reliable measurement values for a wide range of non-ex industry applications.

  • Benefits

    • 2-wire technology, 4 to 20 mA analog output

    • Fault signal on sensor break or short circuit,
      presettable to NAMUR NE 43

    • Meets the EMC requirements as per NAMUR NE 21

    • Galvanic isolation 500 V (input/output)

    • Application specific measuring range setting

  • Field of application

    • PC programmable (PCP) temperature head transmitter for converting various input signals into a scalable 4 to 20 mA analog output signal

    • Suitable for resistance thermometer (RTD) and thermocouple (TC)

    • Device configuration using PC with configuration kit...

Features and specifications

Back

Details

  • Measuring principle

    Head transmitter

  • Input

    1 x RTD, TC

  • Output

    1 x analog 4...20 mA

  • Auxiliary power supply

    8...35 V DC

  • Communication

    PCP (pc-programmable)

  • Installation

    Terminal head form B

  • Accuracy

    (Pt100, -50...250 °C) <= 0,5 K

    (Pt100, -58...482 °F) <= 0,9 °F

  • Galvanic isolation

    yes

Documents / Manuals / Software

Accessories / Spare parts

Nr
Order code
Specification
    • Order code

      The unit is not repairable

    • Order code 51001112

      Spare part set for TMT181/187/188/182

      (4 screws, 6 springs, 10 spring rings)

    • Order code 51000856

      DIN rail clip

      according to IEC 60715 for temperature head transmitters.

    • Order code TXU10-

      Configuration kit TXU10-

      for PC-programmable devices. set-up programme+interface cable for PC with USB-Port.

    • Order code READWIN-

      Readwin 2000 Operation + Read. software

    • Order code TAF10-

      Field housing TAF10

      Application: E+H Head transmitter. Housing: Alu IP66, 100x100x60mm.